Description
Product description
Blade edge: +2
Total length: (65mm/110mm)
Shank Diameter: (6.35 mm)
Quantity: 1pc/pkt
Material: Die hard steel (hardness HRC62).
VESSEL No.DG14 Diamond “GOSAI” Slender Torsion Bit 2pc Set (For Stainless Screws)
SKU:
Diamond particles at the tip-end enable to bite firmly into the screw head!
*Nickel full plate protect the bit from the rust. *Non magnetized bit. Best for work with drill screws, where magnetized bits are not allowed. *Slim tip-end enables to see well the screw head and the point where to tighten a screw. Torsion part at the tip constricted area absorbs the impact caused when the screw head is seated. *New material for bits : Extra Superalloy Steel. Strong and tough. Max hardness 62HRC. *Compatible with 40V tools (also 18V)
Diamond particles at the tip-end enable to bite firmly into the screw head!
*Nickel full plate protect the bit from the rust.
*Non magnetized bit. Best for work with drill screws, where magnetized bits are not allowed.
*Slim tip-end enables to see well the screw head and the point where to tighten a screw. Torsion part at the tip constricted area absorbs the impact caused when the screw head is seated.
*New material for bits : Extra Superalloy Steel. Strong and tough. Max hardness 62HRC.
*Compatible with 40V tools (also 18V)
Loading...
